How Do I Clean My Pool Filter Cartridge

1. Dwelling
2. Maintenance
3. Puddle Pump, Pool Filter & Puddle Pump Cleaning
4. Cleaning Puddle Filter Cartridges

Sign upwardly for the POOLSTYLE e-letter and emails

Receive the latest design trends, hot products, special offers, and more!

Guide to Cleaning Pool Filter Cartridges

Cleaning your filter cartridge is fairly simple, and y'all don't need any special tools or cleaning solutions for removing debris -- in fact, the only thing y'all demand is admission to a hose. It should only take about a half hour to complete this ten-step process:

1. Turn off the power to your pool pump. This is always important when working with electricity, just it's especially critical if your filtration organisation runs on an automatic timer.
2. Open the valves on the filter. The air relief valve releases the pressure, and the ball valve drain the water from the filter.
3. Remove the lid from the tank. Yours might have a lock ring, clamp, or knob, depending on your model.
4. Remove the cartridge from the filter canister. A gentle rocking movement while lifting up might aid to dislodge the filter elements.
5. Set it down in a good spot for cleaning. Recollect, yous'll end upwardly with debris similar decomposed leaves, silt, and fibers, so choose someplace that makes it easy to scoop up afterwards.
6. Inspect the cartridge for harm. Before cleaning, wait for cracks, tears, or other damage. Even a small tear will decrease your filter's performance.
7. Hose off the cartridge.
   • Use moderate pressure from a regular garden hose (no pressure washers!!).
   • Hold the hose at a 45-degree bending to avoid dissentious the filter.
   • Spray off the cartridge from the pinnacle downward until the debris is gone.
   • Flip over the cartridge and echo the spray from the other direction.
   • Affluent out debris out from between the pleats. You can as well advisedly brush the pleated surface to remove small-scale particles.
8. Reassemble the filter canister. Slide the cartridge back into the canister, then replace the filter lid and tighten information technology down to seal the system.
9. Plough on the power to the pump, and restart it. If information technology seems sluggish to restart, information technology may need to be primed.
10. Close the air relief valve. Await until a steady stream of water starts to spray out, then you can shut it.

Pro tip: At least once a yr, soak your cartridges overnight (or about x hours) in a cleaning solution to remove excess build-up. You can find cleaning solutions at your local pool store.

What Non to Practise When Cleaning Your Cartridges

• Don't go on filter cartridges forever. If you lot're seeing inadequate filtration (i.e., your filter organisation is running but y'all even so find excessive droppings and cloudy or muddied pool water) but you aren't noticing a rise in pressure level, this probable means that your filter cartridges are torn or worn out and must be replaced. Call up that the cartridges are reusable, but at some indicate, they will lose their efficacy and just allow water to laissez passer through without filtering it.
• Don't use a power washer on cartridges. The force of a power washer tin destroy the filter cartridges by breaking down the mesh material, which is usually made of paper or a thin fabric.
• Don't worry if the filter mesh isn't perfectly white. If you've followed the cleaning steps but your cartridge film still doesn't look brand new, that'southward OK. Every bit long as you don't see debris or excessive build-upwards that can block the filter system from doing its job of keeping your pool water clean, some discoloration is fine – and even expected over time. If you are unsatisfied with the cleanliness of your filter, you should consider buying a bottle of filter cleaner from your local supply shop.

How tin can you tell when it's time to make clean your filter cartridges?

Dirt and debris collected on the filter volition restrict water flow through the organization. You might notice decreased h2o flow and weaker suction of your pool cleaner. When this happens, pressure within the tank rises. When the pressure level hits the level specified by the manufacturer (usually somewhere in the neighborhood of 8-12 PSI in a higher place the recommended starting pressure of your puddle filter), it's time for a cleaning.

Of course, it all depends on your volume of swimmers, only plan to make clean your cartridge filter every two to half dozen weeks. If your cartridge filter isn't clean, information technology won't work efficiently. You'll end up with debris that gets past the filter back into your pool water.

Pro tip: In that location's a maximum pressure reading characterization on the exterior of the filter. Never let your filter exceed this level on the pressure gauge.

How does a cartridge filter organization work?

A cartridge filter arrangement works past cartoon water into a tank that houses cylindrical cartridges of fine, pleated mesh textile. The tight mesh filters out the impurities from the pool water. The cartridges are then only removed and washed when needed to continue them clean and functional. Read on to acquire how to rinse the filters.

Related Articles

Source: https://www.swimmingpool.com/maintenance/pump&filter/cleaning-pool-filter-cartridges/

Posted by: smithsursee.blogspot.com

Share this post